Daily inspection of the use of advertising engraving machine experience?

The operator is a direct user of the numerical control advertising engraving machine. In order to ensure the normal operation of the numerical control advertising engraving machine, the operator of the numerical control advertising engraving machine is required to perform the following items every day: check whether all the protective plates, the casing and the door are properly operated. Step through each axis during the entire stroke to see if the operation is smooth, ensure that all axis limit switches work properly and adjust to the corresponding limit position, check the rail for signs of scratches or excessive wear, check that the rail cleaner is not Damage, touch the guide rail to check if the lubrication is appropriate.

The inspection of the use of advertising engraving machine experience?

According to the advanced nature, complexity and high intelligence of the CNC advertising engraving machine, its maintenance and maintenance work is more complicated and demanding than ordinary equipment. Maintenance personnel should pass regular inspections, such as the operation of the exhaust fan of the CNC system, whether the cabinet and motor are hot, whether there is abnormal sound or odor, whether the pressure gauge indicates normal, whether the pipelines and joints are leaking, and whether the lubrication condition is normal. Good, etc., actively prevent faults and accidents. If abnormalities should be solved in time, it is possible to eliminate the faults in the state of the teeth, thus reducing all avoidable losses.

Maintenance of the use of advertising engraving machine?

1. The continuous running time of the engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.

2. Every time the machine is used, the engraving machine should be cleaned. It is necessary to clean the dust on the platform and the transmission system. Regularly (weekly) lubricate the transmission system (X.Y.Z three-axis).

3. If the engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.

4. The engraving machine cleans the dust inside the electrical box regularly (depending on the use) and checks whether the screw of the terminal is loose to ensure the safe and reliable use of the circuit.

5, the engraving machine regularly (depending on the use of the situation) check whether the screws of the various parts of the machine are loose.

As long as the equipment is not overloaded, they believe that they can bring you more benefits and benefits.