1. After the carpenter's engraving machine has finished the engraving orientation, it is necessary to classify the X, Y, and Z axis workpiece coordinates as “0”.
2. Adjust the speed of the engraving and the speed of the spindle motor to prevent the speed from being too fast and the speed to be too slow to break the knife.
3. When the tool is automatically set, it is necessary to keep in mind that the tool block is insulated from the aluminum table top of the engraving machine.
4. When carving, if you are not sure about the first knife or are afraid of making mistakes, you can slow down the speed of the infeed, and feel that the speed is adjusted back to normal when the carving is normal; you can also imitate the carving in the empty motion to see if it is normal.
5. If you do not use the carpenter carving machine for a long time, you should regularly refuel every week, preferably for each week to ensure the flexibility of the transmission system. CNC tool
6. The carpenter carving machine is required to run continuously for 10 hours/day or less; to ensure the cleaning of the cooling water and the normal operation of the pump, the water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced on time to prevent the water temperature from being too high. As many circulating water as possible, you can change the large capacity water tank.
7. Every time you use the carpenter carving machine, you should pay attention to the finishing. It is necessary to clean the dust on the channel and the transmission system; and regularly smooth the three axes of the transmission system X, Y and Z.
8. It is best for the operator to wear dust masks and safety glasses when handling the carpenter carving machine to prevent dust and other intrusion during processing from invading the human body and causing discomfort.
9. The daily protection method of the carpenter carving machine should be combined with the dust-proof and dust-removing equipment in the carpenter carving machine, and select the dust-removing equipment.
