“The stone engraving machine has good quality and good processing effect; the advertising engraving machine is accurate in processing and cost-effective; the woodworking engraving machine has a wide application range and good processing effect. These are the praises given by the customers who have used the stone engraving machine produced by the company. In order to ensure the rights and interests of consumers, Xiao Bian also conducted on-the-spot investigations. The factory scale is formal and can guarantee the production of large factories. It is hoped that consumers with needs can understand such conscience businesses and purchase the correct type of engraving machine to obtain a career. Success!
The maintenance methods of the stone engraving machine are mainly considered from the following points:
1. The continuous running time is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.
2. The machine should be cleaned up in time. Stone engraving machine will produce a lot of dust during use, and excessive dust will have a great impact on the life of stone engraving machine. Therefore, be sure to clean the dust on the platform and transmission system after each use, and regularly lubricate the transmission system (X.Y.Z three-axis).
3. If the machine is not used for a long time, it should be refilled regularly (weekly) to ensure the flexibility of the transmission system.
4. Regularly (depending on the use) clean the dust inside the electrical box, check the terminal screw is loose, to ensure safe and reliable use of the circuit.
5. When the stone engraving machine is used, the power must be cut off. After the monitor has no display and the main circuit power indicator is off, it can be left. This can extend the service life of the stone engraving machine.
