Woodworking engraving machine has a quick engraving

In the process of engraving, the engravings are often misplaced, and we are often annoyed to tell our customers that their items have been damaged during the engraving process.
Again, in order to avoid these problems, we explain the following by the following operations:
1. Check if the pliers or chucks used for engraving are used incorrectly. At the same time, the wear of the pliers or chucks of the wood engraving machine will also cause the misalignment of the engraved objects. If the pliers or the chuck is too tight, the moment the blade touches the engraved object will also cause the engraving to pop out.
2. For those irregularly shaped engraved objects, the surface seems to have been fixed very tightly, and will also sway back and forth when subjected to downforce. At this point, you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed. Together with a small strip, the irregularly shaped object is very It is easy to be fixed. Or try to fix the part of the rule and discard its irregular parts.
3. If the downforce to be engraved is large, consider whether you must use a cone-shaped nose. If the diamond head of the engraving machine moves too much during the engraving process, the pressure on the side of the tool will cause the engraving. The movement. If you use an incorrect diamond knife, it will cause the same problem. A 90 or 100 degree diamond knife will drill deep into the material, causing the material to move during the engraving process.
4. Since the woodworking engraving machine is often equipped with multi-function pliers or chucks, and they are made of iron, it is easy to damage the engraved objects or cause them to slip during the engraving process. Then use some rubber caps or rubber pipes. It is helpful to fix the engraved object.
5. For engraving plastic patterns, you can attach the transfer tape to the back of the engraved object, then spray the liquid glue on the side with the tape attached, and then attach it to a surface that can be discarded. This avoids the use of double-sided. Glue, leaving a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Using a special engraved strap, the side of the strap is more viscous than the other side, so the plate can be moved or replaced at will.

Woodworking engraving machine how to splicing breakpoint carving

Due to the limitation of the maximum engraving area of ​​the wood engraving machine, sometimes the size of the material we want to process is larger than the maximum size of the machine. At this time, we need to use such a function - graphics segmentation. Decompose an overall graph into a number of independent graphs, and each graph after the closed graph is broken is still closed. Separate graphics can be used as separate paths, so that large-format engraving requirements can be achieved.
There are many forms of graph segmentation: line segmentation, rectangle segmentation, ellipse segmentation, parallel line segmentation, ring segmentation, and ray segmentation.
Straight line segmentation
Select the graphic to be edited, select the [Modify] / [Simple Split] / [Line Split] command in the menu bar, and then draw a line on the selected graphic, the graphic will be divided, the drawn line must cross the divided Graphics!
2. Rectangular segmentation
Select the graphic to be edited, select the [Modify] / [Simple Split] / [Rectangle Split] command in the menu bar, and then draw a rectangle on the selected graphic, the graphic will be divided, the boundary of the rectangle must be divided The intersection of the graphics.
3. Ellipse segmentation
Select the graphic to be edited, select the [Modify] / [Simple Split] / [Ellipse Split] command in the menu bar, and then draw an ellipse on the selected graphic, the graphic will be divided, the boundary of the ellipse must be divided The intersection of the graphics.
4. Parallel line segmentation
Before doing this, first select the graphic to be edited, and then select [Modify] / [Complex Split] / [Parallel Line Split] command in the menu bar, the parallel split setting dialog box will pop up, which has the split rotation angle setting, Reserved interval setting, split interval setting. The rotation angle refers to the angle between the horizontal dividing line and the horizontal line, the retention interval refers to the width between the portions left after the division, and the division interval refers to the blank width between the deleted portions after the division. Use the mouse to drag the parallel dividing line to the appropriate position, click the left mouse button or press the "Enter" key to split the parallel line. To cancel the operation, click the Cancel button in the Parallel Line Split Settings dialog box or press the ESC key and right-click.
5. Ring segmentation
Select the graphic to be edited, and then select the [Modify]/[Split]/[Circular Split] command in the menu bar. The ring segmentation setting dialog box will pop up, including the initial radius setting, the retention interval setting, and the dividing interval setting. The initial radius is the minimum retention interval value, and the retention interval is the same as the segmentation interval and parallel line segmentation.
6. Ray segmentation
Select the graphic to be edited, and then select [Edit] / [Split] / [Ray Split] command in the menu bar, the ray splitting setting dialog box will pop up, including initial angle setting, retention interval setting and split interval setting. The initial angle refers to the initial angle value of the ray segmentation area, the retention interval refers to the width of the center of the ray band, and the division interval refers to the center width of the region between the two ray bands.